Long Products

Wire Rods

Field of Application:

Automotive, construction and industrial machinery shafts, gears, bolts, springs for engines, high-strength to hang girders of suspension bridges, concrete pole & pile reinforcing high strength wires, nails, welding material. Hot rolling low carbon round wire rods, carbon steel wire rods.

Material : SAE1006, SAE1008, SAE1010, Q195; Q215, Q235
Specification : 5.5mm-26mm
Coil weight : 1000-2500Kg/coil

GB,YB

JISDIN(W-Nr)ASTMAISTSAEBS
05F

10051005015A03
08F

10061006
1006040A04
8

S09CKC10(1.0301)100810081008050A04
CK10(1.1121)
10F

101010101010040A10
10

S10CCK10(1.1121)100810081010040A10
050A10

060A12
S10C

101210121012040A12
050A12

060A12
15F

040A15
15

S15CC15(1.0401)101510151015040A15
CK(1.1141)

050A15
S15CK

Cm15(1.1140)060A15
S17C

101710171017040A17
050A17
060A17
20F

040A20
20

S20C102010201020050A20

Reinforcing Bars

Field of Application :

Construction

Production Standards & Steel Grades :

DIN 488 & Bst 420S, Bst 500S
BS 4449 & Gr 460B, Gr B 500B
ASTM A615 & Gr 40, Gr 50, Gr 60
NF A35 & FeE 400, B 500B

Diameter : Ø8.0 mm – Ø50.0 mm Ø6.0 mm available in coil
Length : 6 – 12 meters (18 meters is upon special request

Beams

Field of Application :

Construction support
Support frames and columns for trolley ways, lifts and hoists
Mezzanines and platforms
Bridges
Trailer and truck bed framing
Machine bases

I BEAMS, (IPE, IPN), H BEAMS, (HEA, HEB) Grades:

S235JR, S275JR, S355JR acc to EN10025
St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM
Sizes : IPE / IPN : 80 – 300, HEA / HEB: 100 – 260
Length : Up to 18 meters

Channels (U, C) Grades :

S235JR, S275JR, S355JR acc to EN10025
St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM

Sizes : 30 x 15 – 300 x 100

Angles

Building structure and projects, workshops; bridges; vehicles as well as building frames, towers, steel derricks.

Sizes for Equal Angles :

18 x 18 x 1.9 – 250 x 250 x 35.0
3/4” x 3/4” x 1/8” – 8” x 8” x 1 1/8”

Sizes for Unequal Angles :

30 x 20 x 3.0 – 250 x 90 x 16.0
1 3/4” x 1 3/4” x 1/8” – 8” x 4” x 5/8”

Length :

Standard Lengths: 6 – 12 meters Special Length: 4 – 18 meters

Flat / Square / Round Bars

Applications :

Shipbuilding, Electric power transmission, general fabrication and repairs in industrial maintenance, agricultural implements, transportation equipment.

Grades

S235JR, S275JR, S355JR acc to EN10025St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM
C45, C60E acc to EN10083

Sizes :

Sizes : Flat Bars 10×3.0 – 150×50 mm Length up to 18 meters
Square Bars : 6×6 – 80×80 mm Length up to 12 meters
Round Bars : Ø4.0 – Ø220.0 mm Length up to 12 meters